We’ve got the New nEw NEW for you right here:
NEW PRODUCTS THIS WEEK
Can you believe CircuitPython is now in its ninth iteration? That’s right! NINE, arguably the most rock and roll number, from “Revolution 9” to Nine Inch Nails to “If 6 Was 9”, “Public Animal #9”, “Karn Evil 9″– listen, we could keep listing them all day, but we gotta keep building upon the coding future for all makers.
Wall Power Supply with USB C – 5V 4A Output and Switch
We love the Raspberry Pi 4 and 5, with their fancy new USB Type C power connectors. Now we have an even better power supply that can be used with either a Pi 4 or even a Pi 5 with 5V output and 4 Amps of current to handle builds with accessories and displays. This flat square body works best when plugging into a wall socket so it doesn’t get knocked out easily, and a handy on/off switch at the end will cut power in a snap.
Wall Power Supply with USB C – 5V 3A Output and Switch
We love the Raspberry Pi 4 and 5, with their fancy new USB Type C power connectors. Now we have an even better power supply that can be used with either Pi 4 or even a Pi 5 with 5V output, 3A of current to handle builds with accessories and displays. This flat square body works best when plugging into a wall socket so it doesn’t get knocked out easily, and a handy on/off switch at the end will cut power in a snap.
Vertical Wall Power Supply with USB C – 5V 3A Output and Switch
We love the Raspberry Pi 4 and 5, with their fancy new USB Type C power connectors. Now we have an even better power supply that can be used with either Pi 4 or even a Pi 5 with 5V output, 3A of current to handle builds with accessories and displays. The vertical-style plug wont take up extra ports on your power strip, and the handy on/off switch at the end will cut power in a snap.
Premium Colorful Silicone Extension Jumper Wires – 200mm x 30 pc – Multi-Colored
These premium extension jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They’re 200mm (~7.8″) long and come loose as a pack of 30 (5 pieces of brown, green, orange, white, purple, grey). They have 0.1″ socket ‘female’ header contacts on one end and 0.1″ plug ‘male’ header contacts on the other.
Adafruit TFT FeatherWing – 3.5″ 480×320 Capacitive Touchscreen – STEMMA QT / Qwiic
Bedeck your Feather project with a beautiful Adafruit TFT FeatherWing, 3.5″ 480×320 Capacitive Touchscreen. This TFT display is 3.5″ diagonal with a bright white-LED backlight and a built-in microSD card socket. You get a massive 480×320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128×64 display, and twice as much as our 2.4″ TFT FeatherWing. As a bonus, this display comes with a multi-touch capacitive touchscreen attached to it already, so you can detect up to 5 finger presses anywhere on the screen.
Visit www.adafruit.com/new for more info.
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
New nEw NEWs From Adafruit is an email newsletter sent out once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up NOW for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Adafruit is on Mastodon, join in! adafruit.com/mastodon
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord
CircuitPython – The easiest way to program microcontrollers – CircuitPython.org
No comments yet.
Adafruit has a “be excellent to each other” comment policy. Help us keep the community here positive and helpful. Stick to the topic, be respectful of makers of all ages and skill levels. Be kind, and don’t spam – Thank you!
