3D model description
Ho Ho Ho merry christmas !
This is the second model of my on-going serie of carrousel model (first one : https://cults3d.com/en/3d-model/game/attaque-de-requin-sauvez-le-benchy )
This is a 100% 3D-printed model, requiring no glue, screws, tape, … You print the parts, assemble the whole thing in 30 seconds, stopwatch in hand, and off you go! It can also be printed with a single extruder 3D printer.
Ideal as a small gift for any occasion 😉
You can also replace the tree with any model you like (you will find a different plane plate without the tree trunk to mount your other model). To fix the model in the center, I suggest you melt the underside of the model to merge the two together.
The middle plate can be printed in two colours with a filament switch for the trunk.
As the model is an assembly, it can be completely disassembled quickly, and you’ll be able to change the scenery if necessary.
I’m planning to add theme variations (For this model, it’s the sea, but I’m thinking of making special ones for Christmas, Halloween, spring,…).
For filaments use
Disclaimer :
The tree model is a remix from Alzibiff
https://www.thingiverse.com/thing:193814/files
The purchase of these pieces does not include commercial use, so please mention me in any sharing of this model (either by my username “@impression_ant” on Instagram, or by my name “Ehret Colin”). Don’t hesitate to contact me if you’d like to make commercial use of it 😉
If you’d like to sell the 3D printed model, go to my Patreon: patreon.com/Impression_ant 😉
3D printing settings
The gift ribbon are to be printed with supports.
The tree has to be printed in vase mode.
Otherwise, standard printing settings apply.
