3D model description
I wanted a large Snowman decoration which doesn’t take forever to 3D print, so I designed this fast-printing, low-poly snowman to print in ‘vase mode’ (and at 0.8mm line width) to optimise print speeds and minimise filament usage.
At the default scale, the snowman stands at approximately 46cm/18” tall (banana for scale 😊) and is broken down into sections so it can be printed on most FDM printers (minimum print bed of 210mm x 210mm required) and then stacked. On a high-speed 3D printer (Voron, Creality K1, Bambu P1P/P1S/X1 etc.), the entire snowman can be printed in around only 6 hours!
After printing the parts, simply assemble the snowman using a little glue where required (hot glue worked well for me). Slots are included in the body/head to help secure the nose and arms, and there is a flat section on the front of the upper body section to make it easier to attach the buttons. I had loads of fun making these with the kids and we now have a (not so) small army of giant snowmen!
I hope you enjoy the design too, and I would love to see photos of your printed snowmen (and snow-women)
Please check out my other fast-printing designs, and keep checking back or follow me, as I have loads more on the way soon.
PLEASE NOTE:
These files are provided for PERSONAL USE ONLY. It is prohibited to share or redistribute these files or any derivatives, or to use them for commercial purposes, including selling the printed models.
Copyright ©
3D printing settings
The main components of this model have been designed to print using ‘vase mode’, including the three body/head sections and the hat (excluding the brim/band).
The other parts should be printed in non-vase mode.
The model has been designed to print best using a 0.8mm line width. I use a 0.32mm layer height, as I find this gives a good balance between print quality and speed.
Please make sure your 3D printer is designed to work safely using whichever settings you decide to use.
