3D model description
Weenie the dachshund dog is another articulated cute toy.
The body consists of 2 parts and it has articulated legs and a tail. The tail can stand. The head is removable.
The archive consists of 4 files – body, body with custom tail brim, pin and head.
We’d be over the moon if you could share your results with us on Cults in the Make section or on your social pages (Here is our Instagram and you also can use #happyflexipets
hashtag)
If you like our designs and would like to support us or sell your prints of them legally, join our Patreon community!
Please remember that the files aren’t allowed to be resold, shared or given away.
Thank you for supporting 3d designers)
Happy prints!
3D printing settings
Print-in-place
No supports
FDM and Resin
Material: Filament PET-G by Devil Design
Printer: Ender 3 V2 Neo
Nozzle: 0.4
Layer height: 0.16 mm
Infill: 15%
Scale: 150% and 180%
There are some tips how to print Weenie
You can print the body and the heads together at any scale you like, no support requires. For better adhesion use brim for the tail and heads. Additionally we added a file with custom tail brim.
Print the pin using brim and scale it at 2-5% more than the scale of the body and heads.
Use durable filaments (we use PET-G)
You can print the pin for each head and glue it in this case the head will be attached greatly. You can cover the pin joint with nail polish to increase friction if the head moves too freely.
If you have any questions feel free emailing us or dropping a message on Instagram we’re always ready to help!
Check out our other dogs
-
12.6k views
-
121
likes
-
259 downloads
-
1 collection
-
