3D model description
Star from Marios Bross Knited Multiparts
New knitted model, a cool star inspired on the one from Mario Bros.
The model is splited in multipars for easy printing.
I used TPU to print it but it can be printed with PLA or any other filament. There are multiple versions of the STL included one with a hole to hang it on a christmas tree. 🎄🎅🌟
Instructions:
1.Download and unzip the files
2.Slice the parts with your favorite slicer, and select the filament you want to use, it can be TPU or PLA.
Parameters we used with TPU
– Nozzle diameter 0.6 mm
– Layer height 0.2 mm
– Line width 0.6 mm
– Wall Line Count 1
– Top Layers 5 (to support overhangs properly)
– Bottom Layers 1 (to be TPU mode flexible)
– Infill Density 3%
– Infill Pattern Lines
– Printing speed 20-30 mm/s
Parameters if you want to print with PLA
– Nozzle diameter 0.6/0.4 mm
– Layer height 0.2/0.28 mm
– Line width 0.6/0.4 mm
– Wall Line Count 1-3
– Top Layers 4-5
– Bottom Layers 4-5
– Infill Density 10-15%
3.Remove any excess or deburr from the parts
4.Use adhesive to join the part
5.If like the model please enjoy and share
Also, you can try one of my free models here: Cool knitted gingerbread man:
https://cults3d.com/en/3d-model/home/cool-knitted-gingerbread-man-ii_aguilar
🙂
.
If like the model please share 🌟🌟🌟🌟🌟
.
NOTE: In case of doubts or comments please send an email to iiaguilar87@gmail.com I would be happy to help you.
Do not forget to share your print results and SUBSCRIBE to my Cults account to get updates.
NOTE IMPORTANT: This stl file is just for personal use. Not for commercial use. No derivatives.
🙂
3D printing settings
Use your favorite brand of filament. The models on the photos were printed with TPU, but you can use the filament you want and share results.
Before printing make sure your bed and 3d printer is calibrated and make sure to have a good first layer in order to avoid issues, we recommend to use the option “Brim” on build plate adhesion from Cura slicer or something related in other software.
Also, we recommend have a good layer cooling in order to prevent curling and warping.
