WinDIY – 3d printable wind turbine

WinDIY is a wind turbine made of mostly 3D printed parts.
### Features
– Wind turbine build from 3D printed parts
– HAWT design
– Rotor diameters from 0.5 to 1.2m possible
– 3D printed wings
– Uses a 3D printed disk generator for energy generation
– Safety functions through active pitch adjustment of the wings, mechanical brake and electronic brake function via the disk generator
– Can be printed using any "normal" (20x20cm bed size) FDM Printer

Pictures

Build instructions

You can find detailed instructions on Nerdiy.de.
– General information: https://nerdiy.de/en/windiy-die-wind-turbine-aus-dem-3d-drucker/
– Build the wings: https://nerdiy.de/howto-windiy-fluegel-der-windturbine-aufbauen/
– Build the wind vane: https://nerdiy.de/howto-windiy-windfahne-zusammenbauen/
– Build hub: https://nerdiy.de/howto-windiy-nabe-inkl-mechanik-aufbauen/
– Build the rotating tower: https://nerdiy.de/howto-windiy-drehturm-aufbauen/
– Build main axis: https://nerdiy.de/howto-windiy-montage-der-hauptachse/
– Build pitch actuator: https://nerdiy.de/howto-windiy-pitch-aktor-zusammenbauen/

License

Unless otherwise stated, all works presented here and on Nerdiy.de that are not based on software/code are subject to the CC BY-NC-SA 4.0 license (attribution – non-commercial – dissemination under the same conditions 4.0 international).
You can find additional infos here: https://nerdiy.de/en/lizenz/