3D model description
This model was created from the idea of reviving the legendary Robbe Airliner.
After several mistakes with the EWD and also the CoG, I managed to successfully print and fly this model.
The model has landing flaps and is powered by 2 FMS 70mm EDFs.
This is my first model that I have drawn, so there are few details to recognize. It was important to me to print the model in LW-PLA AND also in vase mode, so that the annoying post-processing is almost eliminated.
Span 1800mm
Length 1700mm
Weight 4100g (depending on RC equipment)
2x 70mm EDF (FMS)
2x 80A ESC (FMS)
6s 5000mah Lipo
5 channels
The model was printed with a Bambulab X1C and the BambuStudo was also used as a slice.
Surely it also works with other slices. Unfortunately, you will have to find your own settings.
You can find more detailed settings in the instructions.
The test flight can be viewed here:
https://www.youtube.com/watch?v=-PYotYewvHI
Have fun printing and flying
UPDATE: Prints the “Battery Mount” part with 10% infill
3D printing settings
Printing area approx. 240x240x240mm
Slicer BambuStudio
Vase mode
3 Bottom Layer
