-
Printer: Bambu Lab X1C
-
Nozzle 0.2 mm
-
Layer 0.2 mm
ESP/:
The dimensions of the Dice (samples) are “11.9 mm” fit perfectly into the recesses.
Likewise EVERYTHING else needs no modification will fit perfectly or with pressure, but you can help yourself by lowering the horizontal expansion or X-Y contour compensation 👌🏻.
The size of the giant die is 10×10 cm.
Use glue to attach the dots to the giant die.
To hold the hinges, use ordinary PLA 1.75 mm filament available to everyone 🙂
The model does not necessarily need SUPPORTS, However you can use supports on the bases for better QUALITY.
The model includes
-Giant dice in 2 parts “with dots”.
-Giant dice in 2 parts “without dots”.
-Nucleus (x2)
-Integer points (x19)
-Half points (x4)
-Dado version 1
-Dado version 2
In theory you can print other dice models and use them in this model if you change the dimensions to 11.9 x 11.9 x 11.9 mm.
ENG/: 🚩English is not very good, I used a translator
The dimensions of the Dice (Swatches) are “11.9 mm” and fit perfectly in the gaps.
Likewise, EVERYTHING else does not need modification, it will fit perfectly or with pressure, but you can help yourself by lowering the horizontal expansion or the X-Y contour compensation 👌🏻.
The size of the giant dice is 10×10 cm.
Use glue to join the dots to the giant dice.
To maintain the hinges, use common 1.75 mm PLA Filament accessible to everyone 🙂
The model does not necessarily need SUPPORTS, You can still use supports on the bases for better QUALITY.
The model includes
-Giant says in 2 parts “Points”.
-Giant says in 2 part “No Points”.
-Core (x2)
-FULL points (x19)
-Half Points (x4)
-DICE version 1
-DICE version 2
In theory you can print other models of dice and use them in this model if you change the dimensions to 11.9 x 11.9 x 11.9 mm
