3D model description
These stylish drawer units have been specifically designed to print in âvase modeâ (at 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability.
With their sophisticated appearance, these drawers are ideal to grace the desk of any office executive, student, or maker who appreciates a pleasing design aesthetic in addition to useful storage functionality.
Each unit consists of a frame accommodating 4, 6 or 8 drawers, and a decorative trim piece has been included to add a touch of colour around the drawer fronts whilst also increasing overall strength and rigidity.
Key features:
- Very fast to print using âvase modeâ.
- Uses minimal filament.
- Strong and stable design.
- 3 frame types (4,6 or 8 drawers high) each with 3 depth options (90mm, 125mm or 160mm), allowing for 9 different versions in total to ensure suitability for a wide range of storage applications.
Please be aware that these drawers are non-modular in design and in fixed stacks of 4, 6 or 8 drawers high. If you are looking for modular drawers, please check out my other designs as I also have modular drawer systems available.
I hope you find this design useful, and I would love to see some photos of your prints, so please share makes.
Also, please check out my other fast printing designs, and keep checking back as I have lots more on the way soon.
PLEASE NOTE:
These files are provided for PERSONAL USE ONLY. It is prohibited to share or redistribute these files or any derivatives, or to use them for commercial purposes, including selling the printed models.
3D printing settings
The drawers and frames have been designed to print using âvase modeâ and with a 0.8mm line width. I use a 0.32mm layer height, as I find this gives a good balance between print quality and speed.
The front trim piece should be printed in non-vase mode.
Please make sure your 3D printer is designed to work safely using whichever settings you decide to use.
