The Happymodel Mobula6 2024 edition might just be the best BNF Tiny Whoop this year. As someone who has tested many micros, including previous versions of the Mobula, I was eager to see how this one stacked up, especially in terms of flight performance and durability.
If you’re new to Tiny Whoops, check out our buyer’s guide for useful accessories, spare parts, and tips: https://oscarliang.com/best-tiny-whoop/
Where to Buy?
Get the Mobula6 2024 Edition from these vendors:
Specifications
Frame
- Size: 81mm x 81mm x 37mm
- Brand Name: Happymodel
- Wheelbase: 65mm
Flight Controller
- Built-in current meter sensor: Current meter scale 1175
- Built-in voltage meter sensor: Voltage meter scale 110
- Power supply: 1-2S battery input (DC 2.9V-4.35V)
- MCU: STM32F411CEU6 (100MHz, 512K FLASH)
- Built-in 5A (each): Blheli_S 4in1 ESC
- Mount hole size: 25.5mm x 25.5mm
- Built-in UART ExpressLRS: V3.0.0
Onboard 4-in-1 ESC
- Current: 12A continuous, peak 6A (3 seconds)
- Factory firmware: Bluejay ESC V0.19.2
- Support: BLHeli_S Programmable
- Power supply: 1-2S LiPo/LiPo HV
- Default protocol: DSHOT300
Motors
- Motor Dimensions (Dia. x Len): 9.5mm x 14mm
- Model: SE0702 KV28000
- Stator Diameter: 7mm
- Configuration: 9N12P
- Shaft Diameter: 1mm
- No. of Cells (Lipo): 1S
- Stator Length: 2mm
- Weight: 1.46g
Design and Durability
The Mobula6 2024 is incredibly lightweight, tipping the scales at just over 17.8 grams. Compared to the original Mobula6, which weighed 20.2 grams, it’s over 10% lighter. This weight reduction is mainly due to a new lightweight frame design, though it might raise concerns about durability.
Personally, I like the idea of using a more stripped-down canopy—this is exactly what the hardcore Tiny Whoop community has wanted for a long time.
I expected the durability of the 2024 Edition to be worse compared to the original version due to the minimal plastic used in the canopy protecting the camera. However, it held up remarkably well after numerous crashes during my test flights. This resilience is likely due to its overall lightweight design.
However, there are weak stress points around the base of the camera mount. After a few days of flying and crashing, the camera mount became a little deformed, causing the camera to tilt slightly to one side. While still flyable, this issue is noticeable when flying and slightly annoying, but fortunately, it comes with a spare canopy in the box.
Despite this, the overall build quality and construction are solid, with a well-thought-out component layout that makes maintenance and repairs straightforward.
Component Upgrades
The Mobula6 2024 Edition features some notable upgrades in its electronics and camera. The new SuperX 5in1 AIO FC board is streamlined and appears well-suited for future frame designs due to its compact size. It has a built-in ExpressLRS receiver with a copper wire antenna, which I found offers better range and durability compared to ceramic antennas.
The camera is another highlight, offering a wider field of view than the previous Nano 3 camera. While the Nano 3 provided clear images, its narrow field of view was limiting. The new camera’s wider FOV is a welcome improvement, enhancing the flying experience by providing a better sense of the drone’s surroundings.
Flight Performance
The Mobula6 2024 Edition surprised me with its agility and responsiveness right out of the box. It handles beautifully, even when navigating tight spaces and close to obstacles. Although the stock PID and filter tune seemed to require further tweaking to reduce prop wash and vibration, the overall flight performance was solid.
One of the biggest selling points of the Mobula6 is its versatility. Its compact size and quiet operation make it perfect for indoor flying, but it’s also capable outdoors in calm conditions. You don’t need a large space to enjoy flying this drone.
Final Thoughts
The Mobula6 2024 Edition from Happymodel sets a high bar for what a Tiny Whoop can be. Its robust build, lightweight construction, enhanced camera, and improved electronics make it a standout model that should be on every micro drone enthusiast’s radar.
Get the Mobula6 2024 Edition from these vendors:
However, the weak canopy and camera vulnerability are concerns potential buyers should be aware of. The PID tune also has room for improvement.
For anyone from beginners to experienced pilots looking to dive into or upgrade their tiny whoop collection, the Mobula 6 2024 edition offers a compelling blend of performance and fun. While it has some flaws, its strengths make it a worthwhile consideration for anyone passionate about drone flying.